Our fume hoods have been developed over the years in collaboration with our customers to meet even the most demanding requirements.

Stainless and acid-proof steel are used as fume hood materials. The fume hood trap door works on the counter-weight principle, which makes it possible to steplessly adjust the trap door while working.

Our standard range caters for the most common needs, and by fitting the fume hood with the necessary accessories, we are able to provide a broad range of fume hood for varied purposes. Indeed, our fume hoods are used in various kinds of research laboratories throughout Finland.

Model-specific details of our fume hoods can be found below.

FUME HOOD 1010

Fume hoods 1010 is available in varying widths.

STANDARD DIMENSIONS
  • width 1200, 1400, 1600, 1800 mm
  • depth 780 mm
  • height 2500 mm
STRUCTURE AND MATERIALS
  • frame of stainless steel pipe
  • inner walls, worktop and sink of acid-proof steel plate AISI316, alternatively a porcelain sink and acid-proof tile worktop
  • under cupboard of acid-proof steel plate AISI316
  • upper part exterior lining plates of galvanised, white stove-enamelled steel plate
  • trap door operating on the counter-weight principle of laminated, 5 mm thick glass, two-layer structure
  • spouts and gas terminals are coated with acid-resistant epoxy varnish paint
ACCESSORIES
  • Pouring sink of acid-proof steel, 250x100x130 mm or 340x180x140 mm, fitted in the worktop.
  • Maximum of 3 cold water taps, one of which may be equipped with a water extractor or replaced with a warm water tap.
  • 3 gas supply points for, e.g. liquefied petroleum gas, compressed air and nitrogen.
  • Adjustable legs.
ELECTRICAL ACCESSORIES
  • The standard delivery includes two splash-proof socket-outlets with protective earthing and 2 x 18 W or 2 x 36 W lighting fixture with switches.
  • The socket-outlet is protected by a 32 mA circuit breaker, which is included in the delivery.
  • Provision for an exhaust fan start button and signal light
    is made on the cupboard.
  • The cupboard can be fitted with a 3-phase junction box by special order.
UNDER CUPBOARDS

Depending on the width of the fume cupboards, model 1010 comes fitted with two or three under cupboards as standard. The under cupboards are connected to the exhaust air duct.

Exhaust air duct:
Exhaust air volume 200–500 m3/h.

FUME HOOD 1010

FUME HOOD 1015

Fume hoods 1015 has been designed in view of sedentary work. The height of the worktop is 750 mm from floor level.

STANDARD DIMENSIONS
  • width 1200, 1400, 1600, 1800 mm
  • depth 780 mm
  • height 2500 mm
STRUCTURE AND MATERIALS
  • frame of stainless steel pipe
  • inner walls, worktop and sink of acid-proof steel plate AISI316, alternatively a porcelain sink and acid-proof tile worktop
  • under hood of acid-proof steel plate AISI316
  • upper part exterior lining plates of galvanised, white stove-enamelled steel plate
  • trap door operating on the counter-weight principle of laminated, 5 mm thick glass, two-layer structure
  • spouts and gas terminals are coated with acid-resistant epoxy varnish paint
ACCESSORIES
  • Pouring sink of acid-proof steel, 250x100x130 mm or 340x180x140 mm, fitted in the worktop.
  • Maximum of 3 cold water taps, one of which may be equipped with a water extractor or replaced with a warm water tap.
  • 3 gas supply points for, e.g. liquefied petroleum gas, compressed air and nitrogen.
  • Adjustable legs.
ELECTRICAL ACCESSORIES
  • The standard delivery includes two splash-proof socket-outlets with protective earthing and 2 x 18 W or 2 x 36 W lighting fixture with switches.
  • The socket-outlet is protected by a 32 mA circuit breaker, which is included in the delivery.
  • Provision for an exhaust fan start button and signal light
    is made on the hood.
  • The cupboard can be fitted with a 3-phase junction box by special order.
UNDER HOODS

Fume hood 1015 comes with one under cupboard as standard, connected to the exhaust air duct.

Exhaust air duct:
Exhaust air volume 200–500 m3/h.

FUME HOOD 1020

STRUCTURE AND MATERIALS
  • frame of electrogalvanised, white stove-enamelled steel plate
  • worktop and slop sink of acid-proof steel plate AISI316
  • trap door operating on the counter-weight principle of laminated, 5 mm thick glass, two-layer structure
  • spouts and gas terminals are coated with acid-resistant
    epoxy varnish paint
ACCESSORIES
  • lighting fixture 2 x 20 W complete with switches
  • water tap equipped with a detachable hose coupling
  • under cupboards available as accessories on separate order

FUME HOOD 1035

STRUCTURE AND MATERIALS
  • structure the same as model 1020, made entirely of stainless steel plate
  • worktop and slop sink of acid-proof steel plate AISI316
  • trap door operating on the counter-weight principle of laminated, 5 mm thick glass, two-layer structure
  • spouts and gas terminals are coated with acid-resistant
    epoxy varnish paint

Manufactured with straight or slanted walls as specified in the order

ACCESSORIES
  • lighting fixture 2 x 20 W complete with switches
  • water tap equipped with a detachable hose coupling
  • under cupboards available as accessories on separate order