The material strength of the mesh cover is 3.0 mm, but it is also available in more durable grades strong enough for a pallet jack (5.0 mm) and a forklift (8.0 mm).
The cover can also be manufactured as the screw-in type.
A Ø 32 or Ø 50 mm side connection can be welded into the trap, in which case it is equipped with a built-in ring flange.
The standard delivery comprises a trap with fitting complete with a water insulation flange consistent with the flooring material, a removable strainer basket and a mesh cover.
When placing an order for a trap, the customer should check the flooring material used in the intended location so that the trap can be factory-fitted with the correct type of water insulation.
Remember to also ask about the size of the potential additional connection and its orientation in respect of the discharge pipe.
The most important maintenance measure for the traps is to keep them clean.
The stench trap plate is fitted with a detachable rubber plug for removing blockages in the drain.
When you are done, mount the rubber plug and the mesh cover into place.
This applies to all floor drain traps, dirt and sand separators, threshold traps and floor basins manufactured by Kavika. In addition to cleaning, the user must see to it that the traps are always provided with a sufficient amount of water. This is to ensure that the water seals operate flawlessly. Water also prevents dirt from sticking to the traps.